Hiển thị các bài đăng có nhãn Gifts. Hiển thị tất cả bài đăng
Hiển thị các bài đăng có nhãn Gifts. Hiển thị tất cả bài đăng
Thứ Hai, 30 tháng 5, 2011
ideas of a postcard, envelopes
Making toy for kids
Crafts buttons. Centipede
You will need:
- Buttons with two holes
- 2 black buttons with a diameter 0,5 cm
- 3 red buttons diameter of 0.4 cm
- A cotton ball with a diameter of 4 cm
- Insulated wire 1 mm thick
- Multicolored Felt
- Yellow and bright red paint pad
- Black felt-tip pen
- Tassel
- Needle
- Scissors
- Nippers
- Universal Adhesive
1. For the body "bite" the wire cutter length of 20 cm bend one end into a loop and twist it. It will attach the head.
2. Felt cut 10-15 bubbles 3-4 cm in diameter, do the middle of the needle hole. String on the wire in the sequence of colored circles of felt and buttons.
3. When you reach the desired length of the trunk, draw the wire through the second hole of the last button and screw.
4. For the feet need 5 pieces of wire measuring about 10 cm String small buttons on the wire, leaving the ends of 3, see the end of wire held in the second last hole buttons and glue.
5. Bend your legs in half and tightly wind the wire cutters on their torso. Foot spread at equal distances from each other, to avoid bias and sagging. Make sure that the wire-foot does not move between the buttons, the torso, otherwise it will be visible to wire the trunk.
6. To make a head, paint a cotton ball in yellow. Once the paint dries, follow the ball in the two holes for antennae and Glue them universal glue a piece of wire length of 2 cm at the ends of the wire nanizhite on button, twist the wire.
7. At the head stick 2 small black buttons - the eyes and red - the nose. Red paint, draw a mouth and cheeks, apply a white eye patches.
8. On the back of the head hole through. Twisted loop body, insert in the hole and Glue universal glue.
The same principle can be funny puppy or kitten.
Recycling cardboad
How to make a cardboard stand for long earrings
For me the question storing trinkets very relevant =) If the rings, small earrings, pendants and chains of all is simple - put in a cell out of candy, long earrings create some difficulties. If we simply put, it confused with each other, if hung on a flat piece of cardboard together, is awkward to remove - all sways and falls out. Therefore, there is a need for something stable and roomy. And it came to mind:
First, we need a piece of cardboard. Heavier than earrings, the thicker the board, but in any case he must have at least a half-millimeter in thickness. Drew a rectangle on the sheet. To make the small stands of the same size as mine (there fit 12 pairs), the length of it should consist of three parts of 8, 10 and over 8 cm and a height of 5 parts of 2,5 cm words obtained by a rectangle 18 * 12.5 cm Now step back 2 cm to the right and left, and draw the dotted line.We find the middle of the first, third and fifth horizontal lines, the resulting rascherchivaniya rectangle on the side.And draw from these seredinok horizontal line to the dotted line.
You also need to draw a rectangle of 12 * 9 cm and divide it into three equal horizontal parts. Then back right, left and bottom of each of the resulting rectangle to 1 cm, and to the dotted line.
Colored lines on a photo show that you want to cut. Crimson represent the contour of parts, and the blue seats of the cuts.
You should get something like the photo below. One big piece, and three young children.
Sections, which were shown by the blue line, to do equal the width of the thickness of cardboard to details could enter without distortion into each other. Then divide the small details in half horizontally and pierce a thick needle holes as much as you need. I have pierced 3 pairs of 2, but hung up when three pairs of earrings, it was found that fits all.
Then the details need redecorated. I was eager to assemble construction soon and see what happens, so I just painted the canvas with acrylic paint on both sides. But we can do smarter, and close cardboard thin slices with a tissue, using the technique of decoupage, for example. In general, at this stage, decorate things, as the head vzbredet and give it to dry. But then again pierce holes, because the paint could close them. In fact, you could not pierce them at the last stage, and only do it now, but I had not guessed, when masters sample.
Now collect the rack! Bends long made up the main items up at a right angle, and insert into slots slots small details until it stops. That's it! It was very stable, and you can hang your favorite earrings =)
But since you can store smaller ornaments. Out of the box of chocolates, I took the plastic cell, cut them in the form of a drawer and inserted into it. Easier to nowhere, and so convenient!
Đăng ký:
Nhận xét (Atom)
