Fairy with the gift

Making Angel tutorial

Dress - crepe satin, cape - organza. Fabric treated with gelatin. 





Gift - a bead in a piece of organza. 













Wings can be left flat or otgofrirovat. To do this, put the wings folded in half in a piece of thin cloth (see photo). Presses a strong arm, and clockwise scrolls through all this, how would pull out from under the palms. Better description, unfortunately, I can not. 



Glue the wings. 



Eyes. Gouache + PVA, we can ink. Top can be covered with lacquer. 



Hair. Knit crochet chain and sew in a circle "cap". Boucle yarns give effect curls. Hair glue. 



Glue the head point or hot glue. 

Read More

ideas of a postcard, envelopes

Gift Card Holder

    

Thanks (Ribbon Scraps) 

 

So Nice to Me

Star Trio

Crayola Color Explosion Ideas

Easy Valentines Card

You Make My Heart Happy

Read More

Recycling work: Decorating a garden plot with plastic bottles

To make such a capacity you need to use a five-liter plastic bottle (preferably with a square shape), paint, cardboard, scissors and your imagination.

And a couple more examples of how you can use plastic containers in the yard.

These are the mini sunflowers.

Or there are the hanging flowerpots.

Or here for such fixtures on the veranda.

Read More

Making toy for kids

Crafts buttons. Centipede 

You will need:

• Buttons with two holes
• 2 black buttons with a diameter 0,5 cm
• 3 red buttons diameter of 0.4 cm
• A cotton ball with a diameter of 4 cm
• Insulated wire 1 mm thick
• Multicolored Felt
• Yellow and bright red paint pad
• Black felt-tip pen
• Tassel
• Needle
• Scissors
• Nippers
• Universal Adhesive
• 
  

1. For the body "bite" the wire cutter length of 20 cm bend one end into a loop and twist it. It will attach the head.

2. Felt cut 10-15 bubbles 3-4 cm in diameter, do the middle of the needle hole. String on the wire in the sequence of colored circles of felt and buttons.

3. When you reach the desired length of the trunk, draw the wire through the second hole of the last button and screw.

4. For the feet need 5 pieces of wire measuring about 10 cm String small buttons on the wire, leaving the ends of 3, see the end of wire held in the second last hole buttons and glue.

5. Bend your legs in half and tightly wind the wire cutters on their torso. Foot spread at equal distances from each other, to avoid bias and sagging. Make sure that the wire-foot does not move between the buttons, the torso, otherwise it will be visible to wire the trunk.

6. To make a head, paint a cotton ball in yellow. Once the paint dries, follow the ball in the two holes for antennae and Glue them universal glue a piece of wire length of 2 cm at the ends of the wire nanizhite on button, twist the wire.

7. At the head stick 2 small black buttons - the eyes and red - the nose. Red paint, draw a mouth and cheeks, apply a white eye patches.

8. On the back of the head hole through. Twisted loop body, insert in the hole and Glue universal glue.

The same principle can be funny puppy or kitten.

Read More

Recycling cardboad

How to make a cardboard stand for long earrings 

For me the question storing trinkets very relevant =) If the rings, small earrings, pendants and chains of all is simple - put in a cell out of candy, long earrings create some difficulties. If we simply put, it confused with each other, if hung on a flat piece of cardboard together, is awkward to remove - all sways and falls out. Therefore, there is a need for something stable and roomy. And it came to mind:

First, we need a piece of cardboard. Heavier than earrings, the thicker the board, but in any case he must have at least a half-millimeter in thickness. Drew a rectangle on the sheet. To make the small stands of the same size as mine (there fit 12 pairs), the length of it should consist of three parts of 8, 10 and over 8 cm and a height of 5 parts of 2,5 cm words obtained by a rectangle 18 * 12.5 cm Now step back 2 cm to the right and left, and draw the dotted line.We find the middle of the first, third and fifth horizontal lines, the resulting rascherchivaniya rectangle on the side.And draw from these seredinok horizontal line to the dotted line.

You also need to draw a rectangle of 12 * 9 cm and divide it into three equal horizontal parts. Then back right, left and bottom of each of the resulting rectangle to 1 cm, and to the dotted line.

Colored lines on a photo show that you want to cut. Crimson represent the contour of parts, and the blue seats of the cuts.

You should get something like the photo below. One big piece, and three young children.

Sections, which were shown by the blue line, to do equal the width of the thickness of cardboard to details could enter without distortion into each other. Then divide the small details in half horizontally and pierce a thick needle holes as much as you need. I have pierced 3 pairs of 2, but hung up when three pairs of earrings, it was found that fits all.

Then the details need redecorated. I was eager to assemble construction soon and see what happens, so I just painted the canvas with acrylic paint on both sides. But we can do smarter, and close cardboard thin slices with a tissue, using the technique of decoupage, for example. In general, at this stage, decorate things, as the head vzbredet and give it to dry. But then again pierce holes, because the paint could close them. In fact, you could not pierce them at the last stage, and only do it now, but I had not guessed, when masters sample.

Now collect the rack! Bends long made up the main items up at a right angle, and insert into slots slots small details until it stops. That's it! It was very stable, and you can hang your favorite earrings =)

But since you can store smaller ornaments. Out of the box of chocolates, I took the plastic cell, cut them in the form of a drawer and inserted into it. Easier to nowhere, and so convenient!

Read More

Modeling element "node"

Hướng dẫn may áo tạo nút trước ngực

Read More

Cards for the newborn and baby

jun 1 cards

1. 

2. Template-cut blue sole booties, size 8x3 cm, scalloped scissors from the white paper - middle, and upper part of booties booties with holes (in any size and shape). The upper part of booties better to cut slightly smaller than average, for a better view of figure region. As well as delicate reed white.

3. From the inside latch to identify the line, stepping back from the edge of 2 mm, and central lines of each circle.

4. From the inside latch needle puncture holes 2 mm apart. Better puncture holes from the inside to the face, because growing openwork effect it:)

5. All parts of booties double-sided tape to glue on the foam-based to effect it 3D. This tape can be replaced with foam wallpaper surface, but in two layers, combining paper-based parties.

6. Openwork upper part is not necessary to glue on the tape, she looks so pretty volume.

7. Separately tie blue ribbons and ribbon length 14 cm white ribbon from a ribbon wider. Little blue ribbons stuck on the openwork of the booties.

8. From the blue of cardboard (I have a white underside) cut the size of postcards based 29h19. For this purpose, the markup impose a metal ruler and hold the bureaucratic knife.

9. The center of the framework for a good half fold greeting cards, hold a ruler nepishuschey handle.

10. White cardboard with scissors cut out the background figured dimensions 12,5 x17 cm on the basis of sticking to the double-sided tape, glue for strength promazyvaem, you can pencil. If the glue - to anoint a pencil on the tape, it will be possible to move the item because Scotch tape adheres to the surface immediately and correct, if the curve is imposed, we can not (!)

11. Cut the printed label and a blue background a little more. Paste the label on the background.

12. Glue the ribbon on the booties tangled at times. Inscription gives volume with adhesive tape on the foam base.

13. Well, all the details prepared, you can begin to assemble cards.

14. Anchoring booties (a tangled ribbon itself lies right), with the tips of the ribbons turned up. In place of the crossing ribbon Glue bow, booties fasten under the label and in any order fasten butterflies.

15. If you prefer, you can decorate your butterflies strazikami and mid-Cards - paper tape with scalloped edges (for example).

16. A little patience, a little more desire, and all must come out. Good luck! I hope my MC will be useful for you.

Read More